741V-SS-TR ADJUSTABLE NEEDLE VALVE – Tamper resist version
741V-SS-TR ADJUSTABLE NEEDLE VALVE – Tamper resist version
Needle valve system for precise, consistent fluid control.
The 741V Series valve design applies low viscosity assembly fluids with accurate, extremely close repeat deposit control.
Spring-loaded Teflon® needle packings compensate for wear and significantly reduce maintenance downtime.
Because the stainless steel needle shutoff is at the dispense tip adapter, there is virtually no dead fluid volume in the valve.
Tamper Resist version valve requires special key (included) for stroke controll settings – this prevents unwanted changes of valve settings.
Features
• Adjustable fluid flow control
• Unaffected by entrapped air in fluid
• Zero dead fluid volume
• Fluid input up to 300 psi (20.7 bar)
• Positive shutoff
• Cycle rate exceeds 400/minute
• Low-maintenance design
|
1K/2K
|
Single Component |
|---|---|
|
Type
|
Needle |
|
Series
|
741 |
|
Wetted parts
|
Stainles Steel 303 |
Weight: 317.5 grams (11.2 oz)
Actuating air pressure required: 70 to 90 psi (4.8 to 6.2 bar)
Maximum input fluid pressure: 300 psi (20.7 bar)
Fluid inlet thread: 1/8 NPT female
Fluid outlet: Male luer lock
Mounting: 1/4-28 UNF tapped hole
Cycle rate: Exceeds 400/minute
Air cylinder body: Type 303 stainless steel
Fluid body: Type 303 stainless steel
Piston: Type 303 stainless steel
Needle: Type 303 stainless steel
Tip adapter/needle seat: Type 303 stainless steel
SafetyLok™ collar: Nylon
Needle packings: Teflon
