781RC-SS SPRAY VALVE .046
781RC-SS SPRAY VALVE .046
781RC MicroMark® Recirculating Spray Marking System
The 781RC MicroMark Recirculating Spray Marking System produces uniform round patterns and stripes from 5.0mm to 30.4mm (0.20″ to 1.20″) wide without clogging or overspray.
This unique marking system eliminates the clogging, maintenance and downtime encountered with standard marking systems by using a recirculating pump to keep pigments in suspension and a programmable air delay after each cycle to clean the spray nozzle.
This MicroMark system can be used to color-code similar components, indicate pass/fail, or show production or test status. It can be activated manually, or interfaced with other systems to mark at scheduled intervals.
Features
• No clogging, dripping or drying out
• Keep pigments in suspension
• No missed shots
• Consistent size and placement
• Cycle rate exceeds 400/minute
• No mist or overspray
• Low-maintenance design
|
1K/2K
|
Single Component |
|---|---|
|
Type
|
Spray |
|
Series
|
781 |
|
Wetted parts
|
Stainles Steel 303 |
Specification:
Size: 104.6 mm length x 26.9 mm diameter (4.12" x 1.06")
Weight: 235.3 g (8.29 oz)
Actuating air pressure required: 4.8–6.2 bar (70–90 psi)
Maximum input fluid pressure: 7.0 bar (100 psi)
Fluid inlet thread: 1/8 NPT female
Mounting: (1) 1/4-28 UNF tapped hole or adjustable mounting block
Cycle rate: Exceeds 400 per minute
Air cylinder body: 303 stainless steel
Fluid body: 303 stainless steel
Air cap: 303 stainless steel
Piston: 303 stainless steel
Needle and Nozzle: 303 stainless steel
Needle packings: Teflon
