7860C-RS RADIAL SPINNER SYSTEM
7860C-RS RADIAL SPINNER SYSTEM
COST EFFECTIVE WAY TO APPLY PRODUCTION FLUIDS INSIDE CYLINDRICAL PARTS
Nordson EFD’s radial spinner system makes it easy to apply neat, consistent bands of low-to medium-viscosity fluids inside cylindrical parts between 10 mm and 127 mm (0.4 in. and 5 in.) in diameter.
The radial spinner system includes a precision dispense valve, air motor, bracket, valve/motor controller, disc assembly and dispense tip. Disks and tips are available in different sizes to meet a wide variety of applications.
During operation, the valve dispenses a controlled amount of fluid onto the spinning tapered disk. As the fluid leaves the edge of the disk, it is distributed as a narrow, even band on the wall of the part.
Benefits
• Applies correct amount on every part
• Applies material in correct location
• Keeps material off unwanted areas
• Eliminates waste, mess and rework
• Improves product performance and appearance
• Low-maintenance design reduces downtime
• Operates in vertical or horizontal position
|
1K/2K
|
Single Component |
|---|---|
|
Type
|
Radial spinner |
|
Series
|
7860 |
|
Wetted parts
|
Stainles Steel 303 |
Specifications
Size: Air motor: 10.5 cm (4.13")
Bracket: 4.7 x 9.5 cm (1.85 x 3.75")
Weight: Air motor: 90.4 g (3.2 oz)
Bracket: 94.5 g (3.3 oz)
Air consumption: <3.2 SCFM at 5.4 bar (80 psi)
Air motor housing: Black anodized aluminum
Shaft: Tool steel
Disc: Passivated Type 303 stainless steel
Air pressure required:
7160RA controller: 4.8 bar (70 psi) minimum
7860C-RS radial spinner: Variable speed control
Mounting: 5/16-24 and 1/4-20
Spinner discs:
7021842: 9 mm (0.354") radial spinner / disc
7021836: 12 mm (0.473") radial spinner / disc
7021838: 15 mm (0.590") radial spinner / disc
7021840: 19 mm (0.745") radial spinner / disc
